Modem router unblocked - supports all 4G GSM cards + 5G
Modem is unblocked - supports all 4G GSM cards
The device is a gesignete, but it is also ready to support future 5G networks!
The modem contains an external drive and an internal modem. It leads to an Ethernet cable with PoE power that ends in the internal unit. The internet spreads using 3x 1Gbit LAN and wirelessly using 802.11a Wi-Fi/b/g/n/ac.
The Huawei B2368 modem allows you to connect your home to the Internet. The internal unit contains a 2.4 and 5 GHz WiFi access point, and three Gigabit Ethernet (Gigabit Ethernet) ports can also be used if necessary. The modem supports both current and planned LTE bands (3.5 and 3.7 GHz) and technologies including 4 × 4 MIMO (Both FDD and TDD) and Carrier Aggregation. It thus provides a theoretical speed of up to 600/150 Mbps.
The Huawei B2368(22) has a more sensitive antenna and can be used in far worse places where most LTE signals have not yet been available.
The modem also offers extensive configuration options and is also characterized by a high level of security. The internal unit is powered by a network adapter connected to a 230V network, the outer unit that contains the LTE part is then connected to the internal unit by an Ethernet cable for external use, which serves not only to transfer data, but also to power the external unit (Power over Ethernet).
The Huawei B2368 modem is also interesting by recently winning the famous Red Dot Design Award, which is considered the design "Oscars".
Device type: Huawei B2368 (models B2368-66 and B2368-22 are two exactly the same modems, they are probably only slightly different installation material in the box)
LTE Cat.12 / Cat.13 CPE
DL Cat.12 / UL Cat13
Used chipset: HiSilicon Balong 750
Theoretical download speed (DL) up to 600Mbps
Theoretical recording speed (UL) up to 150Mbps
LTE 4G band support 1/3/7/8/20/38/40/41/42/43
Antenna Gain: 9dBi Gain in 3.5GHz
WLAN: 802.b/ g / n / ac, dual band (2.4GHz and 5GHz)
Router power supply: 12V, 2A max
Antenna power: PoE (Power over Ethernet)
3 x RJ45 Ethernet LAN (3x1Gbit)
1 x RJ11 telephone port
1 x USB port
1 x microSIM slot
Additional modem parameters:
Address for connection: https://192.168.1.1
Device username: admin
Device Password: CPE@huawei
Firmware: B2368_V100R001C00SPC057T (30.03/2019 NEW firmware is available now !!!
Supported languages: ENG, PL (after upgare to 085T ENG, CZ, SPN)
Supported operating systems: Android, iOS, Windows 2000 SP4 / XP SP2 / Vista / Win7 / Win8 / Win10, Mac after OS X 10.4, Linux
The user's manual can be found here: https://www.t-mobile.cz/dcpublic/Huawei_B2368-66_cz_manual.pdf
Step-by-step instructions on how to install the device can be found here: https://www.youtube.com/watch?v=iaFwtAzVW3g
Huawei B2368 LTE modem allows you to connect your home to the Internet. The internal unit contains a 2.4 and 5 GHz WiFi access point, and three Gigabit Ethernet (Gigabit Ethernet) ports can also be used if necessary. The modem supports both current and planned LTE bands and technologies, including 4 × 4 MIMO (FDD and TDD) and carrier aggregation.
The modem offers extensive configuration options and is also characterized by a high level of security. The internal unit is powered by a network adapter connected to a 230 V network.
To restart the device, simply press and hold the RESET button for 3-10 seconds.
To restore the factory device to its factory defaults, make sure that the LED indicator
POWER lights up (does not flash), and then press and hold the RESET button for more than 10 seconds.
If you forget your password to the web control interface, you can use the RESET button on the back of the modem to reset the settings from the default configuration file. This means that all settings will be lost and the password to the web interface will be reset to the default value.